Lifetime Warranty] [1/4" Inverted Male Flare] PO2 12" inch Pigtail Propane Hose Connector, Connects QCC1 with Acme Nut - for 2-Stage Auto Changeover Regulator, Connects Propane Cylinder to RV Van Trailer Tank
Sale!

Lifetime Warranty] [1/4″ Inverted Male Flare] PO2 12″ inch Pigtail Propane Hose Connector, Connects QCC1 with Acme Nut – for 2-Stage Auto Changeover Regulator, Connects Propane Cylinder to RV Van Trailer Tank

Original price was: $33.35.Current price is: $10.00.

SKU: 8258874409149 Category:

Description

[1/4″ Inverted Male Flare] PO2 12″ inch Pigtail Propane Hose Connector, Connects QCC1 with Acme Nut – for 2-Stage Auto Changeover Regulator, Connects Propane Cylinder to RV Van Trailer Tank

Key Features

  • Length: 12 inches
  • Hose Material: Flexible thermoplastic
  • Fittings Material: Solid brass for durability and corrosion resistance
  • Tank Connection: QCC1 (Type 1) with large plastic Acme nut for hand-tightening
  • Regulator Connection: 1/4″ Inverted Male Flare
  • Pressure Rating: 350 PSI maximum working pressure
  • Safety Feature: Integrated excess flow safety device

Replaces / Cross-Reference Part Numbers

  • Model: PO2
  • Replaces other 12-inch pigtail hoses with a QCC1 tank connection and a 1/4-inch inverted male flare regulator fitting.

Compatibility & Fitment

  • Designed for use with two-stage automatic changeover LP regulators on RVs, campers, and travel trailers.
  • Connects standard 5 lb to 40 lb propane cylinders with QCC1/Type 1 valves to a regulator’s 1/4″ female inverted flare inlet.
  • Not for use in high-pressure applications upstream of a regulator.

When to Replace

  • Visible signs of wear, such as cracks, abrasions, cuts, or brittleness in the hose material.
  • After any propane leak is detected at the hose or its fittings.
  • If fittings are corroded, damaged, or will not seal properly.
  • As part of routine maintenance, typically every 5 to 7 years, depending on use and exposure to elements.

Installation Tips

  • Ensure the propane cylinder valve is fully closed before installation or removal.
  • Hand-tighten the green or black Acme nut onto the propane cylinder valve. Do not use tools.
  • Use a wrench to secure the 1/4″ inverted flare fitting to the regulator inlet port. Use a second wrench to hold the regulator fitting to prevent damage.
  • After installation is complete, slowly open the cylinder valve and check all connections for leaks using a soap and water solution.
  • Position the hose to prevent sharp bends, kinks, and contact with hot surfaces or sharp edges.

Reviews

There are no reviews yet.

Be the first to review “Lifetime Warranty] [1/4″ Inverted Male Flare] PO2 12″ inch Pigtail Propane Hose Connector, Connects QCC1 with Acme Nut – for 2-Stage Auto Changeover Regulator, Connects Propane Cylinder to RV Van Trailer Tank”

Your email address will not be published. Required fields are marked *